Honda : Redeveloped 2.2 i-CDTi diesel that meets stringent Tier II Bin 5 Emissions Requirements coming to the US

Thanks to revolutionary NOx catalytic converter that enables a great reduction in NOx emissions sufficient to meet stringent U.S. Environmental Protection Agency (EPA) Tier II Bin 5 emissions requirements, Honda is getting ready to import a revised version of its 2.2 CDTi diesel engine to the States within three years. The catalytic converter features an innovative system using the reductive reaction of ammonia generated within the catalytic converter to "detoxify" nitrogen oxide (NOx) by turning it into harmless nitrogen (N2).

Press Release : The new catalytic converter utilizes a two-layer structure: one layer adsorbs NOx from the exhaust gas and converts a portion of it into ammonia, while the other layer adsorbs the resulting ammonia, and uses it later in a reaction that converts the remaining NOx in the exhaust into nitrogen (N2). Ammonia is a highly effective reagent for reducing NOx into N2 in an oxygen-rich, lean-burn atmosphere. This ability to generate and store ammonia within the catalytic converter has enabled Honda to create a compact, lightweight NOx reduction system for diesel engines. The system also features enhanced NOx reduction performance at 200–300ÂșC, the main temperature range of diesel engines.

Honda designed the catalytic converter for use with its 2.2 i-CTDi diesel engine, which has earned widespread praise for quiet, clean operation and dynamic performance since its introduction in 2003 on the European Accord model. By further advancing combustion control, the 2.2 i-CTDi delivers cleaner exhaust to the NOx catalytic converter. Honda achieved this by optimizing the combustion chamber configuration, reducing fuel injection time with a 2,000-bar common rail injection system and boosting the efficiency of the EGR (exhaust gas recirculation) system. Thanks to these improvements, Honda has reduced the amount of NOx and soot normally found in engine exhaust, while increasing power output.

Along with developing superior technology for cleaning exhaust gas, Honda plans to address other technical challenges in developing clean diesel engines, such as handling diesel fuels with different cetane numbers and meeting U.S. On-Board Diagnostic System requirements. Honda plans to introduce its next-generation diesel engine in the U.S. within three years.

Gasoline engines presently employ three-way catalytic converters that offer NOx reduction rates as high as 99%, but this performance is possible only at the stoichiometric air-fuel ratio. In the oxygen-rich environment of a lean-burn diesel engine, three-way catalytic converters only reduce NOx levels by approximately 10%. Honda's new catalytic converter efficiently reduces NOx in a lean-burn atmosphere, enabling diesel engines to rival gasoline engines in cleanliness. The compact system is also easy to install in passenger vehicles.

Technorati: , , , , , , , , , , ,

Volga V8 Roadster - Russians Overhaul a BMW 650i Cabriolet into a modern classic !


Talk about "Overhaulin"... These Russian guys over at Volga -a company which will probably close in 2007, seem to have put Chip Foose and his "Overhaulin" TV Series to a shame with their new product, the Volga V8 Roadster.


As you can see from the development phase pictures, this 60's idesign nspired roadster is actually a camouflaged BMW 650i Cabriolet ! And note that this is not the first time that Volga has attempted and act like this. Back in 2001, the Russians produced the Volga V12 Coupe which was entirely based on the BMW 850CSi Coupe -they even left the Bavarian Coupe's interior practically intact !

Like the Coupe V12, the V8 Roadster was made to honour a classic model of Volga, the unknown to the west, Volga GA3-21P -although that car was just a humble everyday vehicle as you can see in the pictures bellow.

Besides the fact that the Roadster V8 wears BMW 650i's 368 Hp 4,8 litre V8 engine we haven't got any other specs, but you have to admit that the folks over at Volga have yet again done a marvellous job in designing this car!


Volga V12 Coupe Facts and Specs: Made to honour Volga's classic GA3-219, the V12 Coupe was unveiled in 2001. According to the company, the BMW 850CSi based Coupe V12 used the Bavarian 380 Hp 5.7 litre V12 engine which was was good enough to speed it up to 100 km/h (62 mph) from stance in 6,6 sec while for the quarter mile (0-400 m) it needed 14,7 sec.


Technorati: , , , , , , , , , , , , ,

Uncensored : 2007 Ford Mondeo Sedan Production Version Pictures !


O
k, last week we got our share of leaked pics from the Mondeo Wagon Concept before its official Paris unveiling. But that was only a few days before and anyway, it was a concept, so not much harm done. This time though, thanks to Fordeurope (unofficial site) we get to see a whole gallery of "uncensored" pictures from the 2007 Mondeo Sedan production version -6 months ahead of it's official debut at the 2007 Geneva Motor Show in March ! The reportage says that these pics where taken during the filming of 007's Casino Royal Film, where the 2007 Mondeo has a role in it.


But enough with that, lets go back to the car itself. Got to hand it to Ford's design team for managing to keep as close as possible to last year's wonderful Iosis concept. Finally we've got a Ford sedan that doesn't look like a french toast on four wheels. And that's not all cause by the looks of the new S-MAX MPV on which the 2007 Mondeo is based on, its seems that Ford's engineers got their way and maintained Mondeo's predecessor's excellent road handling. We'll have more on the 2007 Mondeo after the Paris Show. via: Autoblog.com & Fordeurope.net

Technorati: Ford+Mondeo, 2007, Ford+Mondeo+Wagon+Concept, autos, auto+news, car+news, automobile, Mondial+de+l'Automobile, 2006, cars, automotive, vehicles,Paris+International+Motor+Show

Related Posts Plugin for WordPress, Blogger...
http://carscoop.blogspot.com/